Waspaloy® Bar - AMS 5706 - UNS N07001

Waspaloy® Bar - AMS 5706 is a precipitation hardening, austenitic nickel-based alloy which is used in elevated temperature applications. This alloy has been used for gas turbine engine parts, which require considerable strength and corrosion resistance at temperatures up to 1600ºF (871ºC). Major applications of Waspaloy® are for highly stressed parts in the turbine section of jet engines, such as blades, vanes, rings and discs.


Waspaloy® 5706 Inventory Size Ranges

Bar

0.375" - 2.000"

Get a Quote

Not finding what you are looking for? Connect with our sourcing group at sourcing@upmet.com


Standard Inventory Specifications

  • AMS 5706
  • UNS N07001
  • AMS 5704 (Capable of)
  • AMS 5707 (Capable of)

Other industry standards we comply with:

  • PWA LCS
  • GE Aircraft Engine (GT193)
  • GE Aviation S-SPEC-35 AeDMS S-400
  • RR SABRe Edition 2
  • DFARS Compliant
  • EN 2.4654
  • Line marked >.500 inch diameter
  • Predominantly produced by VIM-VAR melt method. Solution treated, centerless ground or rough turned

 


Common Trade Names

  • Waspaloy®

Common Applications of Waspaloy® 5706

  • Aerospace fasteners
  • Compressor discs
  • Shafts
  • Spacers
  • Turbine cases

Chemical Composition

Chemical Composition of Waspaloy® Bar 5706
Element Percent by Weight
Ni Nickel 58.00%
Cr Chromium 19.00%
Co Cobalt 13.00%
Mo Molybdenum 4%
Ti Titanium 3.00%
Al Aluminum 1.50%
Back to product info

Physical Properties of Waspaloy® 5706

 
Non-magnetic. Waspaloy® Bar - AMS 5706 Maintains high strength, toughness, and excellent rupture properties to 1400ºF (760°C). This alloy has good resistance to oxidation and sulfidation to 1600ºF (871°C) due to its high chromium content. Waspaloy® Bar - AMS 5706 displays excellent resistance to corrosion by combustion products encountered in gas turbines and aircraft jet engines at temperatures up to 1600ºF (871ºC). Intergranular oxidation occurs at temperatures above 1600ºF (871ºC). This alloy has excellent resistance to stress corrosion cracking and adequate hot corrosion resistance.
Density 0.296 lbs/in3, 8.19 g/cm3

The technical data provided is for information only and not for design purposes. It is not warranted or guaranteed.

Back to product info

Mechanical Properties of Waspaloy® 5706

 
Hardness Hardness of stock is typically 230 BHN. Supplied in the solution treated condition - 1825-1900ºF (996-1038°C) for 1 hour. Waspaloy® Bar - AMS 5706 exhibits best machinability in this condition. After machining, parts are normally stabilized at 1550ºF (843°C) for 4 hours, air cooled, followed by precipitation aging at 1400ºF (760°C) for 16 hours, air cooled. The hardness of this alloy in the fully heat treated condition ranges from 34 to 44 Rockwell C.
Machinability

Rating: 12% of B-1112

Typical stock removal rate: 30-50 surface feet/minute with carbide tooling.

COMMENTS:

  • Waspaloy® AMS 5706 bar is difficult to machine, even in the solution treated condition. Rigid set-up, plenty of power, sharp tools and positive cuts are important. Use of carbide or ceramic tools is required.
Back to product info

Waspaloy® is a registered trademark of Pratt & Whitney, a United Technologies Company.

*The technical data provided is for information only and not for design purposes. It is not warranted or guaranteed.