• Products
  • Stainless Steel
    • 17-4
    • 17-7
    • 301 ANN
    • 301-1/4 Hard
    • 301-1/2 Hard
    • 301 Full Hard
    • 302 ANN
    • 304/304L ANN
    • 316/316L
    • 321 ANN
    • 347 ANN
    • 410 ANN
  • High Temp Alloy
    • Inconel 718
    • Alloy-X
    • Inconel 625
    • A-286
  • Cobalt
    • 188
    • L605
• Services
  • Slitting
  • Shearing
  • Edging
  • Leveling

301-1/2 Hard Stainless Steel Sheet & Coil

Properties

• General
• Chemical
• Physical
• Mechanical

.

Stainless Steel

Type 301 (UNS Designation S30100)

Mechanical Properties

Type 301 is used in the annealed and cold rolled conditions. In the work-hardened condition, Type 301 develops higher tensile strength than the other stable austenitic grades. Minimum properties for plate, sheet and strip per ASTM A240 and A666 follow.

MINIMUM ROOM TEMPERATURE MECHANICAL PROPERTIES PER, ASTM A240 AND A666 SPECIFICATIONS

Condition	Tensile Strength, Min.		0.2% Yield Strength, Min.		Elong. In 2" (50mm)
	Ksi	MPa	Ksi	MPa	%, Min.
Annealed	75	515	30	205	40
1/4 Hard	125	862	75	517	25
1/2 Hard	150	1034	110	758	18*
3/4 Hard	175	1207	135	931	12*
Full Hard	185	1276	140	965	9*

* Value shown for thickness greater than 0.015 in. (.038mm).

Back to 301-1/2 Hard Stainless Steel

Instant Online Quote (Sheet)

Request for Quote (Coil)

We stock only prime metals and alloys that are certified to AMS, MILS and ASTM specifications. Materials are ordered not by just gauge, but to precise decimal thickness.