301 Stainless Steel Sheet & Coil

Properties

Stainless Steel

Type 301 (UNS Designation S30100)

Physical Properties

Melting Range: 2250-2950°F (1399-1421°C)
Density: 0.2850 lb/in³ (7.88g/cm³
Specific Gravity: 8.03
Modulus of Elasticity in Tension: 28·10⁶ psi (193 GPa)^*

Mean Coefficient of Thermal Expansion (Annealed Condition)
Temperature Range		Mean Coefficient of Thermal Expansion
°C	°F	cm/cm°C	in/in/°F
20-100	68-212	16.6·10^-6	9.2·10^-6
20-300	68-572	17.6·10^-6	9.8·10^-6
20-500	68-932	18.6·10^-6	10.3·10^-6
20-700	68-1292	19.5·10^-6	10.8·10^-6
20-871	68-1600	19.8·10^-6	11.0·10^-6

Since the expansion coefficient is higher than that of many other metals and alloys, this characteristic should be considered in the design of equipment involving Type 301 and other materials of construction.

Thermal Conductivity
Temperature Range		Coefficients
°C	°F	W/m·K	Btu/(hr/ft²/hr/°F/ft)
20-100	68-212	16.30	9.40
20-500	68-932	21.40	12.4

Specific Heat
Temperature Range		J/kg°K	Btu/lb/°F
°C	°F	J/kg°K	Btu/lb/°F
0-100	32-212	500	0.12

Magnetic Permeability

H/m Annealed
1.02 Max @ 200 H

Electric Resitivity
Temperature Range		microhm-cm	microhm-in
°C	°F	microhm-cm	microhm-in
20	68	72	28.3
100	212	78	30.7
200	392	86	33.8
400	752	100	39.4
600	1112	111	43.7
800	1472	121	47.6
900	1652	126	49.6

Back to 301 Stainless Steel